Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial video, you will learn how to remove and replace the front headlight bulb on a GasGas EC 300. First, obtain the new bulb and remove the two rubber rings that hold the front headlight in place: then disconnect the electrical connector of the dipped beam bulb and remove the rubber protective cap. At this point, unclip the metal spring and extract the bulb; replace it with the new one with the same fitting (in this case, type H4) and refit it, connecting the connector and placing the headlight back in position!

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on a Gasgas EC 300
Replacing the Headlight Bulb on a Gasgas EC 300
Ec 300 Today, this guide shows you how to remove and replace the headlight bulb or the entire headlamp on the Gasgas EC 300 enduro bike. First, remove the p…
How to Replace the Headlight Bulb on the Gasgas EC 300
How to Replace the Headlight Bulb on the Gasgas EC 300
Ec 300 Today, we will go through the instructions to remove and replace the front headlight and its bulb on the Gasgas EC 300 enduro bike. First, move to th…
How to install the LED bulb in the front headlamp of the GasGas EC 300
Ec 300 To install the LED bulb in the front headlamp of the GasGas EC 300, you need to loosen the screws that secure the seat and those that hold the side p…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos