Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the LED bulb in the front headlamp of the GasGas EC 300

Model: Gasgas Ec 300
Part: Headlight bulb

This video is currently unavailable

To install the LED bulb in the front headlamp of the GasGas EC 300, you need to loosen the screws that secure the seat and those that hold the side panels of the bike; all these components must be removed to access the underlying wires, which should be disconnected.

Additionally, you can unscrew the screws that secure the front panel of the bike, completely removing it and inserting the headlamp into a perforated panel.

This will be fixed to the front of the bike, and the new headlamp will be connected to the wires, which will then be covered by refitting the seat or side panels.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on a Gasgas EC 300
Replacing the Headlight Bulb on a Gasgas EC 300
Ec 300 Today, this guide shows you how to remove and replace the headlight bulb or the entire headlamp on the Gasgas EC 300 enduro bike. First, remove the p…
How to Replace the Headlight Bulb on the Gasgas EC 300
How to Replace the Headlight Bulb on the Gasgas EC 300
Ec 300 Today, we will go through the instructions to remove and replace the front headlight and its bulb on the Gasgas EC 300 enduro bike. First, move to th…
Replacing the Front Headlight Bulb on a GasGas EC 300
Replacing the Front Headlight Bulb on a GasGas EC 300
Ec 300 In this tutorial video, you will learn how to remove and replace the front headlight bulb on a GasGas EC 300. First, obtain the new bulb and remove t…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos