Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will go through the instructions to remove and replace the front headlight and its bulb on the Gasgas EC 300 enduro bike. First, move to the front of the bike and start unscrewing the screws of the front headlight, detaching it from the frame; then disconnect the electrical connector of the bulb and detach it from the housing to remove it, as shown in the video. At this point, replace and install the new light of the correct type with the same fitting; check its operation and then reassemble the optical unit, securing it properly!

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on a GasGas EC 300
Replacing the Front Headlight Bulb on a GasGas EC 300
Ec 300 In this tutorial video, you will learn how to remove and replace the front headlight bulb on a GasGas EC 300. First, obtain the new bulb and remove t…
Replacing the Headlight Bulb on a Gasgas EC 300
Replacing the Headlight Bulb on a Gasgas EC 300
Ec 300 Today, this guide shows you how to remove and replace the headlight bulb or the entire headlamp on the Gasgas EC 300 enduro bike. First, remove the p…
How to Dismantle the Engine of the GasGas EC 300?
How to Dismantle the Engine of the GasGas EC 300?
Ec 300 On the GasGas EC 300, you can dismantle the engine by extracting the block from its corresponding housing after loosening the fixing bolts of the rel…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos