Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the Geely MK thermostat?

Model: Geely Mk MK 1 - Years 2006-2023
Part: Thermostat

In order to replace the Geely MK thermostat, you need to go and open the bonnet, so that you have access to the components inside the engine compartment: you will need to go and disconnect the cables connected to the battery and loosen its fixing screws, so that the device can be removed from its housing. In this way it will be possible to disconnect pipes connected to the thermostat, which can now be extracted from its housing and replaced with a new spare part. After the replacement, it will be possible to insert the new spare part and fit all the other removed components.

Posted on 28 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the thermostat on the Geely Mk
How to replace the thermostat on the Geely Mk
Geely Mk (2006-2023 / MK 1) To replace the car cooling circuit thermostat it is necessary to: open the bonnet, locate the thermostat on the right side of the engine under the di…
How to disassemble and replace the thermostatic valve of the Geely Mk
How to disassemble and replace the thermostatic valve of the Geely Mk
Geely Mk (2006-2023 / MK 1) In this video tutorial we will see the main instructions that will allow us to disassemble and replace the thermostatic valve of the Geely Mk. First …
How to replace the cabin air filter of the 2017 Geely Mk.
How to replace the cabin air filter of the 2017 Geely Mk.
Geely Mk (2006-2023 / MK 1) Periodically replacing the cabin air filter of your 2017 Geely Mk is very important, especially if you want to ensure that you breathe quality air wh…

Other guides you may be interested in

How to Install Universal Roof Bars on a Renault Clio

Install universal roof bars on a Renault Clio. Universal roof bars are used on cars with roof rails (fixed bar secured to the roof of the car) and without. Fit the bar kit (as shown in the video) with the bars adjusted according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once you have adjusted the width of the anchoring brackets (measure with a tape measure), tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, fit the safety caps on both sides.

Watch the video!


by ScegliAuto

More videos