|
Do it yourself
| |||
| ||||
How to Adjust the Brakes on a Geely Mk
Model: Geely Mk
MK 1
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
Adjust the brakes on your Geely Mk. First, remove the rear wheels by lifting the vehicle off the ground. Your Geely has drum brakes, so the adjustment is purely mechanical. Remove the retaining clip and loosen the nut. Now, start pulling off the drum. On some vehicles, you may need to remove a screw first. If necessary, tap the drum with a hammer. The adjustment is done using this spring: While holding it, use another screwdriver to apply pressure and adjust the tension through the hole shown in the video. With the left screwdriver, slowly open or close the tension. Once it's properly adjusted, set and adjust the parking brake. After you finish adjusting and have replaced the drum, position the nut and leave space to reinstall the retaining clip. Don’t forget to double-check the clip. Reposition the cover and gently tap it to secure it. You can then reinstall the tire. Not all vehicles have the same adjustment system.
Updated on 13 July 2026 by ScegliAuto
Related tutorials
Geely Mk
(2006-2023 /
MK 1)
To replace the clutch on a Geely MK, open the hood to access the bolts securing the clutch cover at the top. Disconnect all connectors attached to th…
Geely Mk
(2006-2023 /
MK 1)
In this tutorial video, you will learn how to disassemble and replace the instrument cluster of the Geely LK by following these simple steps. First, …
Geely Mk
(2006-2023 /
MK 1)
In this video tutorial, you will learn how to remove and replace the rear door panel of the Geely Mk in simple and quick steps. First, open the rear …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Hyundai i20
These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |