Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel of the Geely Mk

Model: Geely Mk MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

Video tutorial

In this video tutorial, you will learn how to remove and replace the rear door panel of the Geely Mk in simple and quick steps. First, open the rear door and start unscrewing the fastening screws located on the side of the panel using a Phillips screwdriver; then remove the grab handle using a plastic pry tool, as shown in the video.

At this point, pry on the sides of the panel to detach and remove it, disconnecting the electrical connector of the window switch; apply the reverse procedure for reassembly!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of the Geely MK
How to Remove the Rear Door Panel of the Geely MK
Geely Mk (2006-2023 / MK 1) In today's video tutorial, we will go through the steps on how to remove the rear door panel of the Geely MK, following the instructions provided bel…
How to Remove the Door Panel from a Geely MK
How to Remove the Door Panel from a Geely MK
Geely Mk (2006-2023 / MK 1) This brief and simple guide shows how to remove the front door panel from a Geely MK, following the instructions below. First, open the front door an…
How to Replace the Control Arm on the Geely Mk
How to Replace the Control Arm on the Geely Mk
Geely Mk (2006-2023 / MK 1) This guide outlines the main steps to remove and replace the front control arm on the Geely Mk. First, lift the vehicle and start by removing the fro…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos