Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Battery of a Geely MK

Model: Geely Mk MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

Video tutorial

To change the battery in the remote of a Geely MK, use a screwdriver to separate the two halves of the remote cover to see what type of battery is inside. Inside, there is a CR2032 button battery, which you can easily find for a few dollars at any convenience store or supermarket.

Using the screwdriver or tweezers, remove the battery - which should be disposed of at a certified recycling center - from under the spring that holds it in place and replace it with the new one, making sure to install it in the correct polarity. Clean the contacts, especially those on the silicone housing, before reassembling the cover.

Do this, close it up, and the job is complete.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Thermostat on a Geely MK
How to Replace the Thermostat on a Geely MK
Geely Mk (2006-2023 / MK 1) To replace the thermostat on a Geely MK, open the hood to access the components inside the engine bay. Disconnect the cables connected to the battery…
How to Remove the Door Panel from a Geely MK
How to Remove the Door Panel from a Geely MK
Geely Mk (2006-2023 / MK 1) This brief and simple guide shows how to remove the front door panel from a Geely MK, following the instructions below. First, open the front door an…
How to Replace the Control Arm on the Geely Mk
How to Replace the Control Arm on the Geely Mk
Geely Mk (2006-2023 / MK 1) This guide outlines the main steps to remove and replace the front control arm on the Geely Mk. First, lift the vehicle and start by removing the fro…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos