Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door panel in the Geely Coolray?

Model: Geely Geely Various
Part: Door trim panel

As we can see in this tutorial, removing the rear door panel in the Geely Coolray is an extremely simple and fast operation. First, let's go inside the car, then remove the bottom of the small upper storage compartment. Next, unscrew the screw that was just released with a screwdriver with a cross tip, detach the front cover of the handle and remove the additional bolts. At this point, all that's left is to remove the last screw located inside the opening handle, separate the panel from the door, and disconnect the various connectors.

Posted on 15 August 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator of the Geely Coolray
How to reset the service indicator of the Geely Coolray
Geely Geely Various In this new mini guide dedicated to those of you who own a Geely Coolray, we will explain the steps you need to follow if you intend to manually rese…
How to replace the battery of the Geely Coolray key
How to replace the battery of the Geely Coolray key
Geely Geely Various If the button battery inside the key of your Geely Coolray is completely discharged and you want to find out how to replace it correctly, all you hav…
How to replace the remote control battery of the Geely Coolray?
How to replace the remote control battery of the Geely Coolray?
Geely Geely Various As we can see in this tutorial, replacing the Geely Coolray remote control battery is a very simple and fast operation. To do this we will not need s…

How to Remove the Cabin Filter from a Nissan Juke

In this video, let’s see how to remove the cabin air filter from a Nissan Juke. Open the glove compartment and unclip the end stop arms. Then, use a screwdriver to remove the securing screws. After completing the previous steps, unscrew the side screws in the glove compartment and remove the plastic cover. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment away from the dashboard. Then, slide the air filter out of its housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos