Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of a Toyota Aygo

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight

See other generations:
Video tutorial

To carry out this operation, you will need to release the bonnet from the appropriate lever to lift it and secure it with the prop rod. Disconnect the battery terminals to protect any more delicate circuits, then proceed to unscrew all the bolts securing the bumper and the headlights themselves, as there are additional bolts behind the bumper to remove.

Disconnect the connectors at the back of each headlight to extract it, and in this way, you can install the new headlight.

Reverse the steps described for reassembling the various components.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Remove the Headlamp from the Toyota Yaris 2
How to Remove the Headlamp from the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) How do you remove the headlamp from the Toyota Yaris? To remove the front headlamp of the Yaris, you need to take off the front bumper. Use a screwdr…
How to Replace the Front Headlight Bulb on a Toyota Yaris
How to Replace the Front Headlight Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To replace the front headlight bulb on a Toyota Yaris, you need to detach the front bumper: to do this, remove all the rivets located at the top of t…
How to Replace the Front Headlight Bulb on a Toyota Yaris
How to Replace the Front Headlight Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) This short video will show you how to remove and replace the front headlight bulb on a Toyota Yaris, following these simple steps. First, open the bo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos