Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Light bulb

To replace the front headlight bulb on a Toyota Yaris, you need to detach the front bumper: to do this, remove all the rivets located at the top of the bumper and inside the wheel arch. This will allow access to the screws securing the headlight, which were previously covered by the bumper. In this way, the headlight unit can be removed, and the rear cover of the headlight can be detached, allowing you to take out the bulb from inside. This will be replaced with a new spare part, and the headlight can be reattached and connected again.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
How to Replace the Headlight Bulb on the Toyota Yaris Hatchback?
Toyota Yaris (2020-2026 / MK 4) To replace the headlight bulb on the Toyota Yaris Hatchback, open the bonnet to access the interior of the corresponding headlight. Here, disconnect …
How to Replace the Front Headlamp Bulb on a Toyota Yaris
How to Replace the Front Headlamp Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To replace the front headlamp bulb on a Toyota Yaris, open the bonnet to access the components inside the engine bay. Locate the circular protective …
How to Replace the Headlight Bulb on the Toyota Yaris?
How to Replace the Headlight Bulb on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) If you need to replace the dipped beam bulb on your Toyota Yaris, this video will assist you, accompanied by verbal commentary from the creator. Open…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos