Do it yourself
| ||||
|
Vauxhall Vivaro - Video tutorial
Model: Vauxhall Vivaro
MK 1
- Years 2001-2014 To reach the starter motor in this model it will be necessary to remove most of the components that hide it, it is located behind the radiator and on the slightly lower part of the engine, so try to make room for it from the bottom of your car, in this way you can disconnect the pins connected to it and all the various bolts that secure it in its operating position, then after having extracted it you can install all the necessary components and retrace the steps described backwards for reassembling the components that covered the motor.
Posted on 3 October 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS on the Hyundai I20To reset the low tire pressure sensor, proceed as follows: sit in the driver's seat, turn on the ignition. On the steering wheel, among the right side controls, locate the control at the top left next to the "cruise" control. Press the control several times until the tire pressure situation is selected on the display. At this point, get out of the car and restore the correct pressure of the tire with low pressure. Then enter the passenger compartment again and the low tire pressure warning light will be off. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |