Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Opel Vivaro - Renault Trafic

Model: Vauxhall Vivaro MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Starter motor

See other generations:
Video tutorial

In today's tutorial, you will learn how to remove and replace the starter motor on the Opel Vivaro 1.9 Diesel, as well as the Renault Trafic. First, open the bonnet of your car and start unscrewing the bolts on the starter motor located at the top, situated at the bottom right of the engine bay; then lift the vehicle and disconnect the wiring and the last bolts to remove the starter motor, as shown in the video.

Now replace the starter with a new one, using the original part, and reassemble everything!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Guide to Removing the Starter Motor from the Opel Vivaro - Renault Trafic
Guide to Removing the Starter Motor from the Opel Vivaro - Renault Trafic
Vauxhall Vivaro (2001-2014 / MK 1) .. starter motor of the Opel Vivaro, as well as the Renault Trafic 1.9 DCI. First, open the bonnet and start by disconnecting the coolant hose, allowing.. …
Where is the starter motor of the Vauxhall/Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) .. is located. The same instructions apply to the Renault Trafic and the Nissan Primastar, as they are the same van. To remove the starter motor, which.. …
Replacement of the starter motor of the Opel Vivaro 2.0
Replacement of the starter motor of the Opel Vivaro 2.0
Vauxhall Vivaro (2001-2014 / MK 1) .. motor of the Opel Vivaro 2.0, as well as the Renault Trafic. In order to disassemble it, it is necessary to access it from below, first removing.. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos