Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the Genesis G80?

Model: Genesis G80 MK 3, RG3 - Years 2020-2026
Part: Engine oil

In this tutorial we can see how to change the engine oil in the Genesis G80, very simple operation. First we open the hood and remove the top inlet cap, then we lift the front of the car with a jack, obviously taking all the necessary precautions. Then open the lower panel indicated, removing the relative bolts, and continue unscrewing the filter housing with the appropriate wrench. Once this is done, unscrew the drain plug, let all the oil out, mount the new filter and finally top up completely with 5W-30 oil.

Posted on 4 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the transmission oil of the Genesis G80?
How do you replace the transmission oil of the Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) In order to replace the transmission oil of the Genesis G80, the car must be lifted so that access can be gained to the underside of the engine compa…
How do you replace the cabin filter on the Genesis G80?
How do you replace the cabin filter on the Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) In order to replace the cabin filter of the Genesis G80, you need to go and open the glove box located on the passenger side, so that you can then re…
Where is the fuse box located in the Genesis G80?
Where is the fuse box located in the Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) To successfully and safely locate the fuse box inside your Genesis G80 (year 2016-2020) in a few seconds, follow these steps. First, enter the car an…

Other guides you may be interested in

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos