Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G80
    4. : How do you replace the transmission oil of the Genesis G80?

Genesis G80 - Video tutorial

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Gear oil
Operation: How do you replace the transmission oil of the Genesis G80?

In order to replace the transmission oil of the Genesis G80, the car must be lifted so that access can be gained to the underside of the engine compartment. Here, the protective panel of the transmission box will be present, which must be removed by unscrewing the fixing screws. By doing so, it will be possible to insert the tube into the vent of the box to release the exhausted oil. Once finished, the new oil must be inserted through the same vent using a syringe. After replacement, the transmission box cover must be reinstalled.


Posted on 3 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos