Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. Gv70
    4. : How to replace the gearbox of the Genesis GV70?

Genesis Gv70 - Video tutorial

Model: Genesis Gv70 MK 1 - Years 2020-2024
Part: Gearbox
Operation: How to replace the gearbox of the Genesis GV70?

In order to replace the gearbox of the Genesis GV70 you have to go and lift the machine by means of a bridge, so that you can have access to the components in the lower part of the engine compartment. Here it will be necessary to unscrew the bolts that secure the gearbox to its supports and to the clutch, also disconnecting the sensor connectors. When the mechanism has been released, it will be possible to completely remove it from its housing, so that it can be replaced with a new spare part. After replacement, the new gearbox must be properly fixed and connected.


Posted on 30 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos