Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Rearview Mirror of the Genesis GV70

Model: Genesis Gv70 MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Side mirror

Video tutorial

In this video, you will see how to disassemble and replace the exterior rearview mirror of the Genesis GV70. First, open the front door and start by removing the door panel; to do this, unscrew the screws found on it, then disconnect the electrical connector of the switch panel and the handle cable.

Next, unscrew the mounting screws of the mirror using a socket wrench, disconnect the electrical connector; pull it out from the outside and replace it with the new one, applying the reverse procedure!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Resetting the service light on the Genesis GV70.
Resetting the service light on the Genesis GV70.
Genesis Gv70 (2020-2026 / MK 1) These short and simple instructions will show us how to reset the maintenance service light for the regular oil change of the Genesis GV70. First, le…
How to Connect Your Smartphone to the Genesis GV70
How to Connect Your Smartphone to the Genesis GV70
Genesis Gv70 (2020-2026 / MK 1) In this video tutorial, you will see instructions on how to connect your smartphone via Android Auto or Apple CarPlay to the multimedia system of the…
How to Replace the Transmission Assembly on a Genesis GV70?
How to Replace the Transmission Assembly on a Genesis GV70?
Genesis Gv70 (2020-2026 / MK 1) To replace the transmission assembly on a Genesis GV70, lift the vehicle using a lift to access the components under the engine bay. You will need to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos