Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Genesis
  4. :
  5. G80
  6. : How do you replace the thermostat on the Genesis G80?

Genesis G80 - Video tutorial

Model: Genesis G80 MK 3, RG3 - Years 2020-2024
Part: Thermostat
Operation: How do you replace the thermostat on the Genesis G80?

In order to replace the thermostat of the Genesis G80 you have to open the hood, so that you have access to the components inside the engine compartment: on the left side of the latter it will be possible to identify the passage pipe for the coolant, which must be disconnected by loosening the bolt of its fixing ring. After the pipe has been disconnected, it will be possible to remove the underlying thermostat, which must be removed from its housing and replaced with a new one; after the replacement it will be possible to re-fit the hose and make sure that everything works correctly.


Posted on 13 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos