Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G80
    4. : How to reset the service in the Genesis G80?

Genesis G80 - Video tutorial

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Checks and maintenance
Operation: How to reset the service in the Genesis G80?

As we can see in this tutorial, resetting the service in the Genesis G80 is a very simple and fast operation. Before proceeding, we will obviously have to have completed all the required maintenance work. Let's start by inserting the key and turning on the instrument panel, then, with the key indicated on the right side of the steering wheel, we scroll through the various screens on the display until we reach the one relating to service. At this point, as indicated, we keep the "OK" key pressed for about 5 seconds, or in any case for the time necessary for the interval to be correctly reset.


Posted on 6 May 2024 by ScegliAuto



How to replace the battery of the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) Let's see in this guide how to disassemble and replace the battery of the Genesis G80, in simple and quick steps. First of all we open the tailgate o
How do you replace the thermostat on the Genesis G80?
Genesis G80 (2020-2024 / MK 3, RG3) In order to replace the thermostat of the Genesis G80 you have to open the hood, so that you have access to the components inside the engine compartm
How to start the Genesis G80 when the key does not work
Genesis G80 (2016-2020 / MK 2, DH) If you can't start your Genesis G80 normally because the smart key stopped working suddenly don't worry because below we will explain how to fix the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos