Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start the Genesis G80 When the Key Fob Fails

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Key

If you cannot start your Genesis G80 normally because the key fob suddenly stopped working, don't worry. Below, we will explain how to resolve the issue. First, take your key fob and press the Engine Start/Stop button by touching it with the top of the key fob. At this point, the instrument cluster should power on without any issues, and you will be able to start the engine. This solution is only temporary, and you should replace the key fob battery as soon as possible.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Genesis G80?
How to Reset the Service Light on a Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) As we can see in this tutorial, resetting the service light on a Genesis G80 is a very simple and quick operation. Before proceeding, make sure you h…
Where to Find the Fuse Box of the Genesis G80
Where to Find the Fuse Box of the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) To quickly and safely locate the fuse box inside your Genesis G80 (model years 2016-2020), follow these steps. First, get inside the car and reach th…
How to Replace the Remote Battery for a Genesis G80?
How to Replace the Remote Battery for a Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) Replacing the remote battery for a Genesis G80 is a very simple and quick operation. Here’s how to proceed in this tutorial. You will only need a sma…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos