Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G80
    4. : How to replace the steering box of the Genesis G80?

Genesis G80 - Video tutorial

Model: Genesis G80 MK 3, RG3 - Years 2020-2024
Part: Checks and maintenance
Operation: How to replace the steering box of the Genesis G80?

In order to replace the steering box of the Genesis G80 you have to go and lift the machine so that you can loosen the fixing bolts of the steering rods. Then the wheels must also be removed and the rack completely extracted; once the latter has been removed, it will be necessary to remove the steering box from inside its housing so that it can be replaced with a new spare part. After the new box has been inserted, the rack can also be reinstalled, along with the corresponding wheels and tie rods.


Posted on 18 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos