Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. Genesis G80
    4. : Checks and maintenance

Genesis G80 - Checks and maintenance

Genesis G80 (2016-2020 / MK 2, DH)
How to set the clock on the Genesis G80.
Let's discover in this guide how to set the clock of the Genesis G80, following the instructions below. First of all, we get into the car and turn on the …read all…
Posted on 31 May 2023 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
How to replace the steering box of the Genesis G80?
In order to replace the steering box of the Genesis G80 you have to go and lift the machine so that you can loosen the fixing bolts of the steering rods. Then …read all…
Posted on 18 August 2022 by ScegliAuto
Genesis G80 (2016-2020 / MK 2, DH)
How to reset the service in the Genesis G80?
As we can see in this tutorial, resetting the service in the Genesis G80 is a very simple and fast operation. Before proceeding, we will obviously have to have …read all…
Posted on 6 May 2024 by ScegliAuto
Car stereo (2) Battery (2) Key (2) -board computer (1) Checks and maintenance (3) Brake discs (1) Air filter (2) Cabin air filter (3) Grille (1) Headlight bulb (1) Gear oil (1) Engine oil (2) Brake pads (1) Instrument cluster (1) Fuse box (2) Thermostat (1) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos