Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Genesis
  4. :
  5. Genesis G80
  6. : Car stereo

Genesis G80 - Car stereo

Genesis G80 (2016-2020 / MK 2, DH)
How to reset the car stereo in the Genesis G80?

The car stereo does not work properly, has the display blocked or the sound is not heard? In all these cases, before going to inspect the wiring and other …read all…
Posted on 13 May 2024 by ScegliAuto
Genesis G80 (2016-2020 / MK 2, DH)
How to disassemble the car stereo of the Genesis G80

Today we will see, in this video tutorial, how to disassemble and replace the stock car stereo of the Genesis G80, in simple and quick steps. First we get on …read all…
Posted on 1 May 2024 by ScegliAuto

Car stereo (2) Battery (2) Key (2) -board computer (1) Checks and maintenance (3) Brake discs (1) Air filter (2) Cabin air filter (3) Grille (1) Headlight bulb (1) Gear oil (1) Engine oil (2) Brake pads (1) Instrument cluster (1) Fuse box (2) Thermostat (1) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos