Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. Genesis G80
    4. : Cabin air filter

Genesis G80 - Cabin air filter

Genesis G80 (2020-2024 / MK 3, RG3)
How to replace the cabin filter in Genesis G80?
Replacing the cabin air filter, also known as the pollen filter, isn't complicated and in the case of a car like the Genesis G80 it doesn't even require the …read all…
Posted on 21 April 2023 by ScegliAuto
Genesis G80 (2016-2020 / MK 2, DH)
How do you replace the cabin filter on the Genesis G80?
In order to replace the cabin filter of the Genesis G80, you need to go and open the glove box located on the passenger side, so that you can then release the …read all…
Posted on 20 April 2023 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
How to replace the cabin air filter on the Genesis G80
If we need to replace the cabin air filter on the car, it is necessary to follow the simple steps below: access the cabin and sit on the passenger seat, the …read all…
Posted on 29 December 2022 by ScegliAuto
Car stereo (2) Battery (2) Key (2) -board computer (1) Checks and maintenance (3) Brake discs (1) Air filter (2) Cabin air filter (3) Grille (1) Headlight bulb (1) Gear oil (1) Engine oil (2) Brake pads (1) Instrument cluster (1) Fuse box (2) Thermostat (1) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos