Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Genesis
  4. :
  5. Genesis G80
  6. : Engine oil

Genesis G80 - Engine oil

Genesis G80 (2016-2020 / MK 2, DH)
How to change engine oil on Genesis G80

Let's see below how to replace the engine oil and relative filter on the car. First of all, open the bonnet, remove the oil dipstick and unscrew the filler …read all…
Posted on 4 December 2022 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
How to change the engine oil in the Genesis G80?

In this tutorial we can see how to change the engine oil in the Genesis G80, very simple operation. First we open the hood and remove the top inlet cap, then …read all…
Posted on 4 June 2022 by ScegliAuto

Car stereo (2) Battery (2) Key (2) -board computer (1) Checks and maintenance (3) Brake discs (1) Air filter (2) Cabin air filter (3) Grille (1) Headlight bulb (1) Gear oil (1) Engine oil (2) Brake pads (1) Instrument cluster (1) Fuse box (2) Thermostat (1) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos