Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Genesis G80 - Fuse box

Genesis G80 (2016-2020 / MK 2, DH)
Where is the fuse box located in the Genesis G80?
To successfully and safely locate the fuse box inside your Genesis G80 (year 2016-2020) in a few seconds, follow these steps. First, enter the car and reach …read all…
Posted on 28 October 2023 by ScegliAuto
Genesis G80 (2020-2024 / MK 3, RG3)
Where is the fuse box of the Genesis G80
In the following guide dedicated to your Genesis G80 third series (year 2020-2023) we will find out where all the various vehicle fuses are located. In this …read all…
Posted on 8 June 2023 by ScegliAuto
Car stereo (2) Battery (2) Key (2) -board computer (1) Checks and maintenance (3) Brake discs (1) Air filter (2) Cabin air filter (3) Grille (1) Headlight bulb (1) Gear oil (1) Engine oil (2) Brake pads (1) Instrument cluster (1) Fuse box (2) Thermostat (1) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos