Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Genesis G80

Model: Genesis G80 MK 3, RG3 - Years 2020-2026
Part: Cabin air filter

To replace the cabin air filter on the vehicle, follow these simple steps: Access the cabin and sit in the passenger seat. The filter is located behind the glove compartment, so open the compartment and release the side pins to remove it. After that, you will have access to the area containing the filter. Proceed to detach the cover by pulling it towards you. At this point, you can remove the filter itself and replace it with the new one, then reattach the filter cover and secure the glove compartment.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Genesis G80?
How to Replace the Cabin Air Filter in a Genesis G80?
Genesis G80 (2020-2026 / MK 3, RG3) Replacing the cabin air filter, also known as the pollen filter, is not complicated and in a vehicle like the Genesis G80, it doesn't even require to…
How to Replace the Air Filter of the Genesis G80 5.0
How to Replace the Air Filter of the Genesis G80 5.0
Genesis G80 (2016-2020 / MK 2, DH) Today, let's go through the procedure to remove and replace the engine air filter of the Genesis G80 5.0 gasoline model. First, open the hood of your…
How to Replace the Air Filter in the Genesis G80
How to Replace the Air Filter in the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) In today's video, you will see how to replace the air filter in the Genesis G80. This operation is very simple and can be done independently, as you …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos