Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter of the Genesis G80 5.0

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Air filter

Today, let's go through the procedure to remove and replace the engine air filter of the Genesis G80 5.0 gasoline model. First, open the hood of your car and start removing all the plastic clips found on the top of the bumper, on the sides of the engine compartment; then, remove the cover of the air filter box, as shown in the video. At this point, remove and replace the air filter cartridge with the new one, inserting it in the correct orientation; reassemble the filter box by applying the reverse procedure!

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter in the Genesis G80
How to Replace the Air Filter in the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) In today's video, you will see how to replace the air filter in the Genesis G80. This operation is very simple and can be done independently, as you …
Replacement of the cabin air filter of the Genesis G80
Replacement of the cabin air filter of the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) Today's steps will show us how to disassemble and replace the cabin air filter of the Genesis G80. First, we open the front passenger side door and s…
How to Replace the Cabin Air Filter in a Genesis G80?
How to Replace the Cabin Air Filter in a Genesis G80?
Genesis G80 (2020-2026 / MK 3, RG3) Replacing the cabin air filter, also known as the pollen filter, is not complicated and in a vehicle like the Genesis G80, it doesn't even require to…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos