Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G80
    4. : How to disassemble the car stereo of the Genesis G80

Genesis G80 - Video tutorial

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Car stereo
Operation: How to disassemble the car stereo of the Genesis G80

Today we will see, in this video tutorial, how to disassemble and replace the stock car stereo of the Genesis G80, in simple and quick steps. First we get on board the car and start by removing the plastic covers that we find on the sides; then we lever the central bulkhead of the dashboard to detach and remove it, as shown in the video. At this point we unscrew the screws of the central display, using a Phillips screwdriver, in order to remove the car radio; finally disconnect the electrical wiring on the back, applying the reverse procedure for reassembly!


Posted on 1 May 2024 by ScegliAuto



How to reset the car stereo in the Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) The car stereo does not work properly, has the display blocked or the sound is not heard? In all these cases, before going to inspect the wiring and
How to replace the battery of the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) Let's see in this guide how to disassemble and replace the battery of the Genesis G80, in simple and quick steps. First of all we open the tailgate o
How to reset the service in the Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) As we can see in this tutorial, resetting the service in the Genesis G80 is a very simple and fast operation. Before proceeding, we will obviously ha

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos