Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G80
    4. : How to reset the car stereo in the Genesis G80?

Genesis G80 - Video tutorial

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Car stereo
Operation: How to reset the car stereo in the Genesis G80?

The car stereo does not work properly, has the display blocked or the sound is not heard? In all these cases, before going to inspect the wiring and other components, we can try to reset the car radio. This is sufficient to solve the problem in most cases, without resorting to software reinstallation or other costly interventions. This is a soft reset, i.e. a forced restart and not a hard reset (which instead returns the car stereo to factory settings). To do this, we just need a pen or other pointed object: insert it into the slot indicated by the video and keep it in place for about 5 seconds. The car stereo will restart and should work normally again.


Posted on 13 May 2024 by ScegliAuto



How to disassemble the car stereo of the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) Today we will see, in this video tutorial, how to disassemble and replace the stock car stereo of the Genesis G80, in simple and quick steps. First w
How to reset the service in the Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) As we can see in this tutorial, resetting the service in the Genesis G80 is a very simple and fast operation. Before proceeding, we will obviously ha
How to start the Genesis G80 when the key does not work
Genesis G80 (2016-2020 / MK 2, DH) If you can't start your Genesis G80 normally because the smart key stopped working suddenly don't worry because below we will explain how to fix the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos