Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Genesis
    3. :
  3. G80
    4. : How to replace the Genesis G80 battery

Genesis G80 - Video tutorial

Model: Genesis G80 MK 3, RG3 - Years 2020-2024
Part: Battery
Operation: How to replace the Genesis G80 battery

If we need to replace the battery on this car model, we will find simple instructions on how to behave and on the activities to be carried out in the description below and we can also take a look at the video. On this car model, the battery is located in the boot on the right-hand side next to the spare wheel. Then proceed to first disconnect the negative pole and then the positive pole on which the pre-fuses rest. Then remove the battery from the boot and position the new one and then connect the positive pole first and then the negative one and that's it.


Posted on 10 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos