Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Transmission Fluid in the Genesis G90

Model: Genesis G90 MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Transmission fluid

Video tutorial

Today, we will see in this video tutorial how to replace the automatic transmission fluid in the Genesis G90, as well as in the G80. First, lift the vehicle and locate the oil drain bolt on the pan; use a 8 mm hex wrench to unscrew it, allowing the oil to drain into a container for about ten minutes.

Next, unscrew the fill bolt located on the top of the transmission case.

Use a syringe or pump to add the new transmission fluid, following the video until the end!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

Genesis G90 (2016-2023 / MK 2) To use the automatic transmission of the Genesis G90, first unlock the shifter: press the brake pedal and the release button on the side of the lever…
Genesis G90 (2016-2023 / MK 2) On the Genesis G90, you can set the interior lights in terms of brightness and color. Through this video, you can learn how to do it. First, go to th…
Genesis G90 (2016-2023 / MK 2) Below are the steps on how to disassemble and replace the battery of the Genesis G90 key fob. First, take your key fob and start by removing the phys…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos