Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Gp 800
Part: Wheel

In order to remove the rear wheel of the Gilera GP 800, you must loosen the side bolts that secure the central axle of the wheel to the end of the swingarm: once these bolts have been loosened, it will be possible to completely remove the axle from the center of the wheel. Then you can also loosen the chain so that it is removed from the corresponding sprocket and you will also have to unscrew the bolts that secure the brake caliper to the disc: the wheel will then have been removed from its housing and it will be possible to install the new one, checking that everything works.

Posted on 21 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Sprocket and Crown of the Gilera GP 800
How to Remove the Sprocket and Crown of the Gilera GP 800
Gp 800 Here are the instructions to remove and replace the sprocket and crown on the Gilera GP 800 scooter. First, place your scooter on the centre stand an…
How to Replace the Front Wheel Bearing of the Gilera GP 800?
How to Replace the Front Wheel Bearing of the Gilera GP 800?
Gp 800 To replace the front wheel bearing of the Gilera GP 800, first detach the brake caliper from the disc by unscrewing the appropriate fixing bolts. Onc…
How to Replace the Transmission of the Gilera GP 800?
How to Replace the Transmission of the Gilera GP 800?
Gp 800 You can replace the transmission of the Gilera GP 800 by unscrewing the bolts that secure the cover at the rear wheel, on the left side of the bike. …

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos