Do it yourself
| ||||
|
Model: Gilera Runner Vxr 200
To be able to change the engine oil of the Gilera Runner XVR 200 you have to go to the lower part of the bike, where you can find the oil tank drain plug: the latter must be open and it will be possible to collect the used oil inside a container. Always in the same position, on the right side of the bike immediately under the muffler, it will be possible to identify the oil filter which can be extracted from its housing and replaced with a new one. Finally, it will be possible to top up by inserting the new oil from the breather located on the left side of the bike, in correspondence with the rear wheel.
Posted on 24 September 2022 by ScegliAuto
|
How to remove and replace the front wheel of the Honda Nc 750XToday we will see, in this short and simple guide, how to disassemble and replace the front wheel of the Honda Nc 750X motorcycle. First of all we put our bike on the central stand and we start to unscrew the fixing screws of the front brake caliper, in order to remove it from the disc; let's then loosen the central pin of the wheel, using a socket wrench, as shown in the video. At this point we lift the wheel from the ground with a jack or front stand; remove the pin and replace the wheel, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.003
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |