Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : Air filter

GMC Sierra - Air filter

GMC Sierra (2007-2014 / MK 3)
How do you replace the GMC Sierra air filter?
In order to replace the GMC Sierra air filter, the hood must be opened, identifying the box that contains the filter, which is located on the left side of the …read all…
Posted on 21 August 2022 by ScegliAuto
GMC Sierra (2014-2018 / MK 4)
How to replace the GMC Sierra air filter
One of the most important routine car maintenance interventions is undoubtedly that relating to the replacement of the engine air filter. In fact, a filter in …read all…
Posted on 31 July 2022 by ScegliAuto
GMC Sierra (2019-2024 / MK 5)
How to replace the air filter on the Gmc Sierra
Let's see in this guide how to remove and replace the Gmc Sierra engine air filter, following these simple steps. First we open the engine hood, pulling the …read all…
Posted on 8 May 2024 by ScegliAuto
Airbags (1) Shock absorbers (2) Car stereo (1) Battery (6) Key (3) Locking the trunk (1) V-belt (1) -board computer (9) Checks and maintenance (4) Headlight (2) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Diesel filter (1) Grille (4) Headlight bulb (7) Rear light bulb (2) License plate light (1) Handle (2) Gear oil (1) Engine oil (8) Door panel (2) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (6) Outside rearview mirror (3) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos