Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : Engine oil

GMC Sierra - Engine oil

GMC Sierra (2014-2018 / MK 4)
How to change the engine oil on Gmc Sierra
Open the engine hood and remove the oil filler cover. Raise the car and locate the oil sump, next to the sump there is the oil drain plug and the filter. Using …read all…
Posted on 11 October 2022 by ScegliAuto
GMC Sierra (2007-2014 / MK 3)
How to replace the engine oil and the relative filter of the GMC Sierra 1500 Mk3
The guide shows how to change the engine oil of the GMC Sierra 1500 Mk3. The location of the bleeder valve and engine oil filter are located just behind the …read all…
Posted on 1 December 2022 by ScegliAuto
GMC Sierra (2007-2014 / MK 3)
How to change the engine oil and relative filter of the GMC Sierra Mk3
The guide shows how to replace the engine oil and the relative filter on the GMC Sierra Mk3. After having lifted and secured the vehicle, it is possible to …read all…
Posted on 28 June 2022 by ScegliAuto
GMC Sierra (2007-2014 / MK 3)
How do you change the GMC Sierra engine oil?
The GMC Sierra engine oil change is performed by accessing the lower part of the engine compartment, where the oil tank drain plug will be located. By …read all…
Posted on 23 April 2024 by ScegliAuto
GMC Sierra (2014-2018 / MK 4)
How do you change the GMC Sierra engine oil?
In order to change the GMC Sierra engine oil, access the lower part of the car by loosening the cap of the exhaust pipe. In this way, it will be possible to …read all…
Posted on 9 April 2024 by ScegliAuto
GMC Sierra (2014-2018 / MK 4)
How to change the oil of the GMC Sierra
Before you find out how to change the oil in this vehicle, make sure you have turned off the engine and / or let it cool down long enough. Then lift the car …read all…
Posted on 31 March 2024 by ScegliAuto
GMC Sierra (2007-2014 / MK 3)
How to reset the 2008 GMC Sierra engine oil change notice
The guide shows how to reset the engine oil status of the 2008 GMC Sierra. The reset procedure for the upcoming oil change warning is very simple and is done …read all…
Posted on 22 March 2024 by ScegliAuto
GMC Sierra (2014-2018 / MK 4)
Changing the oil and oil filter on the Sierra GMC
In this guide we will discuss the replacement of the engine oil and its filter on the Sierra GMC vehicle. Then, open the front hood and unscrew the oil filler …read all…
Posted on 22 March 2024 by ScegliAuto
Airbags (1) Shock absorbers (2) Car stereo (1) Battery (6) Key (3) Locking the trunk (1) V-belt (1) -board computer (9) Checks and maintenance (4) Headlight (2) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Diesel filter (1) Grille (4) Headlight bulb (7) Rear light bulb (2) License plate light (1) Handle (2) Gear oil (1) Engine oil (8) Door panel (2) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (6) Outside rearview mirror (3) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos