Do it yourself
| ||||
|
GMC Sierra - Video tutorial
Model: GMC Sierra
MK 4
- Years 2014-2018 Open the engine hood and remove the oil filler cover. Raise the car and locate the oil sump, next to the sump there is the oil drain plug and the filter. Using a ratchet wrench, loosen the oil drain plug and place a pan on the floor to collect the used oil. Finish unscrewing the cap and then unscrew the oil filter with the special wrench, wait a few minutes for all the used oil to drain out. Screw the drain plug back on after cleaning it from oil / grease residues and tighten it with the ratchet wrench. Screw the new filter back on by hand and tighten it with the appropriate wrench. Lower the car and, using a funnel, fill the circuit with new oil (use oil with specifications suitable for the car model, see manual). Close the oil filler cap. Measure the oil level with the dipstick which must be between the minimum and maximum signal.
Posted on 11 October 2022 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |