Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Filter on GMC Sierra 1500 Mk3

Model: GMC Sierra MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

This guide shows how to change the engine oil on the GMC Sierra 1500 Mk3. The drain valve and engine oil filter are located just behind the front suspension frame. You can perform the draining operation without a lift.

On the passenger side, access the drain valve, which can be unscrewed with a 15 mm wrench to allow the flow of used lubricating fluid. Place a container for used oil storage under the vehicle.

Using an oil filter wrench, unscrew the fuel filter and replace it with a new element that has had its seal lubricated. From the engine compartment, fill the oil reservoir with the appropriate fluid.

Start the engine for a few seconds, check the level, and top off if necessary.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a GMC Sierra?
How to Change the Engine Oil in a GMC Sierra?
GMC Sierra (2007-2014 / MK 3) To change the engine oil in a GMC Sierra, access the bottom of the engine bay, where you will find the oil drain plug. By unscrewing this plug, you c…
How to Replace the Engine Oil and Oil Filter on a GMC Sierra Mk3
How to Replace the Engine Oil and Oil Filter on a GMC Sierra Mk3
GMC Sierra (2007-2014 / MK 3) This guide shows how to replace the engine oil and oil filter on a GMC Sierra Mk3. After raising and securing the vehicle, remove the drain plug from…
How to Replace the Air Filter on a GMC Sierra
How to Replace the Air Filter on a GMC Sierra
GMC Sierra (2007-2014 / MK 3) To replace the air filter on a GMC Sierra, open the hood and locate the box that contains the filter, which is on the left side of the engine compart…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos