Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : Fog lights

GMC Sierra - Fog lights

GMC Sierra (2014-2018 / MK 4)
How to replace the rear lights in the GMC Sierra?
In this video we can see how to replace the GMC Sierra rear lights. For this very quick and easy operation, we need a Torx T15 wrench, a plastic spatula and, …read all…
Posted on 16 September 2022 by ScegliAuto
GMC Sierra (1999-2007 / MK 2)
How to replace the GMC Sierra fog light bulb?
In order to replace the GMC Sierra fog light bulb, you need to loosen the screws that secure the headlight inside its housing, located in the rear part of the …read all…
Posted on 23 August 2022 by ScegliAuto
GMC Sierra (1999-2007 / MK 2)
How to replace the front fog lights on the Gmc Sierra
In today's video tutorial we will see how to remove and replace the front fog lights of the Gmc Sierra, following the instructions below. First of all we lift …read all…
Posted on 11 May 2024 by ScegliAuto
Airbags (1) Shock absorbers (2) Car stereo (1) Battery (6) Key (3) Locking the trunk (1) V-belt (1) -board computer (9) Checks and maintenance (4) Headlight (2) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Diesel filter (1) Grille (4) Headlight bulb (7) Rear light bulb (2) License plate light (1) Handle (2) Gear oil (1) Engine oil (8) Door panel (2) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (6) Outside rearview mirror (3) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos