Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Lights of the GMC Sierra

Model: GMC Sierra MK 2 - Years 1999-2007
Part: Fog lights

In today's video tutorial, see how to remove and replace the front fog light assemblies of the GMC Sierra by following the instructions below. First, lift the vehicle and disconnect the electrical connector of the fog light bulb found at the back of the assembly; then unscrew the mounting screws of the fog light to remove it, as shown in the video. At this point, remove the inner assembly from the cover and replace it with the new one; install the new bulb and reassemble everything, applying the reverse procedure!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fog Light Bulb on the GMC Sierra
How to Replace the Fog Light Bulb on the GMC Sierra
GMC Sierra (1999-2007 / MK 2) To replace the fog light bulb on the GMC Sierra, loosen the screws that secure the light in its housing, located at the back of the bumper. To access…
Replacing the Headlights on the GMC Sierra
Replacing the Headlights on the GMC Sierra
GMC Sierra (1999-2007 / MK 2) In this video tutorial, discover how to remove and replace the headlights on the GMC Sierra in simple and quick steps. First, open the hood and start…
Where Are the Fuses Located on the GMC Sierra?
Where Are the Fuses Located on the GMC Sierra?
GMC Sierra (2014-2018 / MK 4) The fuses on the GMC Sierra are located inside the designated fuse boxes mounted within the vehicle: two are located inside the cabin and one in the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos