Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : How to replace the GMC Sierra front bulbs

GMC Sierra - Video tutorial

Model: GMC Sierra MK 3 - Years 2007-2014
Part: Headlight bulb
Operation: How to replace the GMC Sierra front bulbs

In this video we will see how to replace the GMC Sierra front bulbs. Let's start by opening the front hood and then, remove the metal plate that hinders access to the headlight compartment, after identifying the headlight area. Undo the screws and remove the panel. Now let's move the white plastic frame and we can remove the burnt out bulbs. Once this is done, we can replace the burnt bulb or bulbs and replace them by following the procedure performed in reverse. This is a fairly simple and fast procedure, which you can carry out independently in your box.


Posted on 2 June 2024 by ScegliAuto



Replacement of the headlights of the Gmc Sierra
GMC Sierra (1999-2007 / MK 2) Let's find out, in this video tutorial, how to disassemble and replace the headlights of the Gmc Sierra, in simple and quick steps. First of all we o
How to replace the headlight bulbs in the GMC Sierra?
GMC Sierra (2014-2018 / MK 4) In this tutorial we can see how to replace the headlight bulbs in the GMC Sierra, very simple operation. As for the passenger side headlight, we will
Install the led bulbs in the fog lights in the GMC Sierra.
GMC Sierra (2014-2018 / MK 4) Before starting with the replacement of the fog light bulbs in the GMC Sierra, we place our car on a bridge or on a level, in a stable and safe way.

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos