Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : How to replace gmc sierra low beam bulbs

GMC Sierra - Video tutorial

Model: GMC Sierra MK 4 - Years 2014-2018
Part: Headlight bulb
Operation: How to replace gmc sierra low beam bulbs

To replace the low beam bulbs on the Gmc Sierra, we start on the driver's side, then remove the rear light cover by turning it a little anticlockwise, turn the bulb a little anticlockwise, disconnect the bulb connector, take the new bulb, remove it from the package, reconnect it to the connector, position it in the bulb holder paying attention to the tabs on the bulb, turn it a little clockwise and put the rear cover back on by turning it a little clockwise. On the passenger side, we must remove the air filter box by unscrewing the two screws with a long slotted screwdriver, we spread the air hose clamp, disconnect the connector and extract the air filter box; having removed the upper air filter box, we also remove the lower part; with a slotted screwdriver, remove the two clips at the top of the rear light protection, remove the rear light cover by turning it a little anticlockwise, turn the bulb a little anticlockwise, disconnect the bulb connector, take the new bulb , remove it from the packaging, reconnect it to the connector, position it in the bulb holder paying attention to the tabs on the bulb, turn it a little clockwise and put the rear cover back on by turning it a little clockwise.


Posted on 9 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos