Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Third Brake Light Bulb in the GMC Savana?

Model: GMC Savana MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Light bulb

See other generations:
Video tutorial

To replace the third brake light bulb in the GMC Savana, you need a screwdriver to remove the two screws holding the light assembly in place. Once removed, gently pull it outward without applying too much force to avoid damaging the wiring.

At this point, extract the burnt-out bulb and replace it with a new one. Once finished, reinstall the light assembly and use the screwdriver to reposition and tighten the two screws you removed earlier.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Tail Light Bulbs of the GMC Savana
How to Replace the Tail Light Bulbs of the GMC Savana
GMC Savana (2003-2024 / MK 2) This brief and simple guide shows the steps to remove and replace the tail light bulbs of the GMC Savana. First, open the rear hatch of the trunk and…
How to Replace the Key Battery for GMC Savana
How to Replace the Key Battery for GMC Savana
GMC Savana (1996-2002 / MK 1) Thanks to the very simple and minimalist design of your GMC Savana key, replacing the battery inside is particularly easy and quick. Below, you will …
How to Replace the Remote Battery for the GMC Savana?
How to Replace the Remote Battery for the GMC Savana?
GMC Savana (1996-2002 / MK 1) Replacing the remote battery for the GMC Savana, as shown in this tutorial, is an extremely simple and quick task. To do this, you will need a flathe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos