Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light Bulb on the GMC Sierra

Model: GMC Sierra MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fog lights

See other generations:
Video tutorial

To replace the fog light bulb on the GMC Sierra, loosen the screws that secure the light in its housing, located at the back of the bumper. To access these screws, you will need to go underneath the vehicle.

Once the screws are removed, you can pull the light out of its housing, disconnect the connector, and remove the bulb inside. Once the bulb is removed, disconnect its connector and attach the new bulb, inserting it into the light.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Fog Lights of the GMC Sierra
How to Replace the Front Fog Lights of the GMC Sierra
GMC Sierra (1999-2007 / MK 2) In today's video tutorial, see how to remove and replace the front fog light assemblies of the GMC Sierra by following the instructions below. First,…
Install LED Bulbs in the Fog Lights on the GMC Sierra
Install LED Bulbs in the Fog Lights on the GMC Sierra
GMC Sierra (2014-2018 / MK 4) Before starting the replacement of the fog light bulbs on the GMC Sierra, position your vehicle on a lift or a stable, secure surface. Take this prec…
How to Replace the Headlight Bulb on a GMC Sierra
How to Replace the Headlight Bulb on a GMC Sierra
GMC Sierra (2014-2018 / MK 4) To independently replace the headlight bulb on your GMC Sierra (2015-2020), you only need a few minutes. Just follow the steps in this mini guide. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos