Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : Handle

GMC Sierra - Handle

GMC Sierra (1999-2007 / MK 2)
How to replace the exterior door handle on the front door of the GMC Sierra Mk2
The guide shows how to replace the exterior door handle of the GMC Sierra Mk2 front door. The first operation to perform is to disassemble the finishing piece …read all…
Posted on 18 April 2024 by ScegliAuto
GMC Sierra (1999-2007 / MK 2)
GMC Sierra tailgate handle replacement
In this video tutorial we will see how to remove and replace the tailgate handle of the GMC Sierra, in simple steps. First of all, let's move to the rear of …read all…
Posted on 5 April 2024 by ScegliAuto
Airbags (1) Shock absorbers (2) Car stereo (1) Battery (6) Key (3) Locking the trunk (1) V-belt (1) -board computer (9) Checks and maintenance (4) Headlight (2) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Diesel filter (1) Grille (4) Headlight bulb (7) Rear light bulb (2) License plate light (1) Handle (2) Gear oil (1) Engine oil (8) Door panel (2) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (6) Outside rearview mirror (3) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos