Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Tailgate Handle on a GMC Sierra

Model: GMC Sierra MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Handle

See other generations:
Video tutorial

In this video tutorial, see how to remove and replace the tailgate handle on a GMC Sierra in simple steps. First, move to the back of the vehicle and pry on the sides of the handle cover to remove it, using something thin; then open the tailgate and remove the three screws securing the handle with a socket wrench, as shown in the video.

At this point, you can remove and disconnect the tailgate handle, replacing it with the new one, following the video to the end!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Replace the Hinge Bushings on a GMC Sierra Tailgate
How to Replace the Hinge Bushings on a GMC Sierra Tailgate
GMC Sierra (2007-2014 / MK 3) Frequent use of the tailgate on a GMC Sierra may lead to difficulties in opening due to wear on some components. In this video, we will show how to r…
How to Remove the Door Panel on the GMC Sierra
How to Remove the Door Panel on the GMC Sierra
GMC Sierra (2014-2018 / MK 4) In this guide, learn how to remove and replace the front door panel on the GMC Sierra by following the instructions below. First, open the front door…
How to Replace the Outer Door Handle on a GMC Sierra Mk2
How to Replace the Outer Door Handle on a GMC Sierra Mk2
GMC Sierra (1999-2007 / MK 2) This guide shows you how to replace the outer door handle on the front door of a GMC Sierra Mk2. The first step is to remove the trim piece on the mi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos