Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : Grille

GMC Sierra - Grille

GMC Sierra (2014-2018 / MK 4)
How to remove the GMC Sierra 4 front bumper grille
Today we will see, in this short and simple guide, the steps on how to remove and replace the front bumper grille of the GMC Sierra fourth series. First we …read all…
Posted on 15 August 2022 by ScegliAuto
GMC Sierra (2014-2018 / MK 4)
How to remove the bumper grille of the GMC Sierra MK4
In today's video tutorial we will see how to disassemble the front bumper grille of the GMC Sierra fourth series, following these simple and quick steps. First …read all…
Posted on 24 June 2022 by ScegliAuto
GMC Sierra (2019-2024 / MK 5)
GMC Sierra front grille removal 5
In today's video we will see the procedure necessary for the disassembly and replacement of the front bumper grille of the GMC Sierra fifth series. First of …read all…
Posted on 31 March 2024 by ScegliAuto
GMC Sierra (1999-2007 / MK 2)
How do you replace the front grille on the GMC Sierra?
In order to remove the front grille of the GMC Sierra, lift the hood and unscrew all the bolts that secure the panel located in the front part of the engine …read all…
Posted on 25 March 2024 by ScegliAuto
Airbags (1) Shock absorbers (2) Car stereo (1) Battery (6) Key (3) Locking the trunk (1) V-belt (1) -board computer (9) Checks and maintenance (4) Headlight (2) Tail light (1) Fog lights (3) Air filter (3) Cabin air filter (5) Petrol filter (1) Diesel filter (1) Grille (4) Headlight bulb (7) Rear light bulb (2) License plate light (1) Handle (2) Gear oil (1) Engine oil (8) Door panel (2) Front bumper (1) Brake pads (1) Tires (1) Fuel pump (1) Instrument cluster (3) Radiator (1) Passenger compartment heating radiator (1) Wheel (2) Fuse box (6) Outside rearview mirror (3) Windscreen wipers (2) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos