Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the GMC Canyon remote control battery?

Model: GMC Canyon MK 1 - Years 2004-2012
Part: Key

Replacing the GMC Canyon remote control battery, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we will need a small flat-tip screwdriver and a spare 3V CR2032 battery. First of all we identify the slot located on the lower edge, then we lever on it in order to separate the two halves of the remote control. Once this is done, we can proceed with the replacement of the battery taking care to position the spare in the right direction, that is to say with the negative pole facing us.

Posted on 8 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the GMC Canyon remote control battery?
How to replace the GMC Canyon remote control battery?
GMC Canyon (2015-2022 / MK 2) Replacing the GMC Canyon remote control battery, as we can see in this tutorial, is an extremely simple and economical operation. To do this, we will…
How to replace the battery of the GMC Canyon 2 key.
How to replace the battery of the GMC Canyon 2 key.
GMC Canyon (2015-2022 / MK 2) If you want to find out how to properly replace the battery of your GMC Canyon Mk2 key (year 2015-2021), just follow the steps described in the follo…
How to reset the oil service in GMC Canyon?
How to reset the oil service in GMC Canyon?
GMC Canyon (2004-2012 / MK 1) In this tutorial we can see how to reset the oil service in the GMC Canyon pick-up, a very simple and fast operation, to be performed only after comp…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos