|
Do it yourself
| |||
| ||||
|
Model: Harley Davidson Dyna
To replace the muffler of the Harley Davidson Dyna, you need to loosen the screws that secure the muffler to its housing on the right side of the bike, at the bottom near the rear wheel. Once the muffler support screws have been loosened, you can proceed by expanding the ring that connects the exhaust terminal to the corresponding collector. At this point, you can position the new muffler in place, so that you can connect the fastening ring and insert the screws of the respective supports.
Posted on 22 August 2024 by ScegliAuto
Video tutorial
Related tutorials
Dyna
Today, you will see step-by-step instructions for removing the rear wheel to potentially replace the tyre on a Harley Davidson Dyna. First, remove th…
Dyna
Below are the instructions for removing and replacing the battery on a Harley Davidson Dyna motorcycle. First, place the bike on a stand and start by…
Dyna
To replace the rear view mirror on the Harley Davidson Dyna, loosen the nut that secures it from the bottom of its housing, which is located above th…
|
How to Replace the Tyres on the Husaberg FE 450
In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
