Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the rear brake pads of the Harley Davidson Sportster Iron by loosening the screws that hold the brake caliper to the rear disc: once the screws are loosened, it will be possible to completely detach the caliper and remove the pin that secures the pads inside its seat. At this point, it will be possible to insert the new pads inside the caliper and position it on the disc: the new caliper must be secured with the appropriate screws so that it can be verified that everything is functioning correctly.

Posted on 26 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Harley Davidson Sportster Iron 883?
How to Replace the Rear Brake Pads on a Harley Davidson Sportster Iron 883?
Sportster Iron 883 To replace the rear brake pads on the Harley Davidson Sportster Iron 883, loosen the screws securing the rear brake caliper, located immediately next…
Replacing the front brake pads on the Harley Davidson Sportster Iron 883
Replacing the front brake pads on the Harley Davidson Sportster Iron 883
Sportster Iron 883 This guide will illustrate the steps to remove and replace the front brake pads on the Harley Davidson Sportster Iron 883. First, place the motorcycl…
How to Replace the Brake Pads on a Harley Davidson Sportster 883
How to Replace the Brake Pads on a Harley Davidson Sportster 883
Sportster Iron 883 In today's tutorial video, you will learn how to disassemble and replace the front brake pads on a Harley Davidson Sportster 883 Iron in simple steps…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos