Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on a Harley Davidson Sportster Iron 883?

Model: Harley Davidson Sportster Iron 883
Part: Brake pads

Video tutorial

To replace the rear brake pads on the Harley Davidson Sportster Iron 883, loosen the screws securing the rear brake caliper, located immediately next to the shock absorber: once the caliper is released, it can be detached from the disc, allowing you to remove the old pads inside.

At this point, insert the new pads, reposition the brake caliper onto its disc, and secure it with the appropriate screws; this way, you can check that the rear brake functions correctly.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Replacing the front brake pads on the Harley Davidson Sportster Iron 883
Replacing the front brake pads on the Harley Davidson Sportster Iron 883
Sportster Iron 883 This guide will illustrate the steps to remove and replace the front brake pads on the Harley Davidson Sportster Iron 883. First, place the motorcycl…
How to Replace the Brake Pads on a Harley Davidson Sportster 883
How to Replace the Brake Pads on a Harley Davidson Sportster 883
Sportster Iron 883 In today's tutorial video, you will learn how to disassemble and replace the front brake pads on a Harley Davidson Sportster 883 Iron in simple steps…
How to replace the rear suspensions of the Harley Davidson Sportster Iron 883
How to replace the rear suspensions of the Harley Davidson Sportster Iron 883
Sportster Iron 883 These short and simple instructions will show us how to disassemble and replace the rear suspensions of the Harley Davidson Sportster Iron 883 motorc…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos